Your METAL will never RUST again!
Your Metal will never rust again
It is a single component waterborne metal protector that creates an immunity against corrosion.
How does Corrosion Cure works?
The material penetrates into the metal at a rate of 500 microns per month and as a result the metal becomes immune from rust. It has anti corrosive properties and acts as an oxygen scavenger that penetrates metal substrates, replacing oxygen molecules thus prevents corrosion from recurring.
Corrosion Cure can be used without blasting or grinding
One of the major advantages of Corrosion Cure is that it does not require any speacial surface preparation just a simple power wash. There is no need to sandblast as all other anti-rust products require. It can be applied directly on adherent rust remaining on the sureface as well as damp surface for both interior and exterior use.
Corrosion Cure penetration of metal
In just 4 days it has penetrated 45 micron and in 7 days it has fully penetrated the metal.There is no need to sandblast as all other anti-rust products require. Corrizon™ can be guns, airless spray etc. Corrizon™ has a very fast curing time in a wide temperature range. applied directly on adherent rust remaining on the surface as well as damp surfaces. It is suitable for both interior Corrizon™ can be applied on galvanic metal or painted steel, it penetrates the coatings before getting to the metal
Advantage of Corrosion Cure
Effectiveness increases with time as it penetrates the metal. Water base single component ready to use without dilution. Green product does not cause any harm to workers & enviorment.
UL GreenGuard and GreenGuard Gold certified.We are basically taking a simple piece of black metal and turning it chemically into gold. It has a very fast curing time in a wide temperature range. Compatible with a variety of topcoats and paints.
The application requires a very thin layer using simple equipment such as brushes, rollers, spray guns, airless spray etc. Metallurgic tests have shown that rust was not observed on the base galvanic metal or painted steel, it penetrates the coatings before getting to the metal. Corrosion Cure is also compatible metal after 3,600 hours in a salty atmosphere and there is no change in the mechanical properties with a variety of topcoats and paints. All tools can easily be cleaned with water. of the steel.
Certifications
Occupational Health and Safety Assessment Series
ISO18001:2007
Enviormental Management Systems
ISO14001:2015
Quality Management Systems
ISO9001:2015
